Lansmont Model 1000 Vertical Vibration Test System
- Dynamic force
- 816 lbs（3.6 kN）
- Frequency range
- 1 – 300 Hz
Model 1000–65000
Lansmont Hydraulic Vibration Test Systems
Servo-hydraulic vibration systems from Model 1000 to Model 65000, covering 1-500 Hz, 50-8,000 lbs payloads and tables up to 83 x 98 in.
Made by Lansmont Corporation. Supplied and supported in China by WTC (West Technology Corporation). · Manufacturer page ↗
Overview
Lansmont hydraulic vibration test systems reproduce the broadband random vibration a product or package meets in transport and in use. They are servo-hydraulic machines: a hydraulic actuator drives a rigid table whose size and payload capacity are matched to the item under test. The range spans ten vertical models plus one horizontal model, covering a broad spread of payloads, table sizes and strokes.
Frequency coverage runs from 1 Hz up to 500 Hz depending on model, well beyond the range of typical mechanical (bounce) shakers, so both transport simulation and higher-frequency product evaluation can be performed. The standard table lists payloads from 75 lbs (34 kg) on the Model 1000 up to 8,000 lbs (3,628 kg) on the Model 56000, with table sizes from 15.7 in. (40 cm) up to 83 x 98 in. (210 x 250 cm). Strokes range from 2.5 in. (6.4 cm) to 10 in. (25.4 cm); the Model 15000, for example, pairs a long 10 in. stroke with 1-100 Hz operation for low-frequency, high-energy profiles.
All systems use the fully integrated TouchTest Vibration controller and can run sine, random and field-to-lab profiles built from measured data. Selection comes down to the largest test item, its weight and the required frequency and stroke.
The model line-up comprises the Model 1000, 1800, 6200, 7000, 10000, 15000, 28000, 56000 and 65000 vertical systems plus the Model 6000H horizontal system.
Models in this series
| Model | Table size | Dynamic force | Stall force | Frequency range |
|---|---|---|---|---|
| Model 1000 | — | 816 lbs（3.6 kN） | 1,225 lbs（5.4 kN） | 1 – 300 Hz |
| Model 1800 | — | 3,044 lbs（13.5 kN） | 4,566 lbs（20.3 kN） | 1 – 300 Hz |
| Model 6000H | — | 4,936 lbs（21.9 kN） | 7,404 lbs（32.9 kN） | 1 – 300 Hz |
| Model 6200 | — | 4,936 lbs（21.9 kN） | 7,404 lbs（32.9 kN） | 1 – 300 Hz |
| Model 7000 | — | 6,114 lbs（27.2 kN） | 9,171 lbs（41 kN） | 1 – 300 Hz |
| Model 10000 | — | 8,247 lbs（36.7 kN） | 12,370 lbs（55 kN） | 1 – 300 Hz |
| Model 15000 | — | — | 15,000 lbs | — |
| Model 28000 | — | 19,600 lbs（87.3 kN） | 29,400 lbs（131 kN） | 1 – 300 Hz |
| Model 65000 | 60×98 in (152×249 cm) / 82.7×98.4 in (210×250 cm) / 82.7×124 in (210×315 cm) / 102×160 in (259×406 cm) | 42,480 lbs（189 kN） | 63,270 lbs（283.4 kN） | 1 – 300 Hz |
| MS400 | 48 in × 48 in（122 cm × 122 cm） | — | — | 2 – 5 Hz |
| MS2000 | 60 in × 60 in（152 cm × 152 cm） | — | — | 2 – 4.7 Hz |
| TouchTest | — | — | — | — |
Scroll sideways for all columns
Key features
- Servo-hydraulic drive with 1-100 Hz to 1-500 Hz frequency coverage
- Maximum payload from 50 to 8,000 lbs (23 to 3,628 kg)
- Table sizes from 15.7 in. (40 cm) to 83 x 98 in. (210 x 250 cm)
- Strokes of 2.5-10 in., with the Model 15000 using a long 10 in. stroke
- Vertical model range plus the Model 6000H horizontal system
- Fully integrated TouchTest Vibration controller for sine, random and field-to-lab profiles
Applications
- Transport vibration simulation of palletised and unitised loads
- Vibration verification of large crates, cabinets, servers and battery enclosures
- Transport-adaptability testing for appliance, electronics and medical-device packaging
- Durability vibration testing of automotive components and battery packs
- Resonance search and structural optimisation in cushioning design
- Field-to-lab random vibration reproduction from measured route data
Get a quote and configuration
Tell us the test object and the standard you must meet. An engineer replies within one business day.
Related models
Lansmont Model 1800 Vertical Vibration Test System
- Dynamic force
- 3,044 lbs（13.5 kN）
- Frequency range
- 1 – 300 Hz
Lansmont Model 6000H Horizontal Vibration Test System
- Dynamic force
- 4,936 lbs（21.9 kN）
- Frequency range
- 1 – 300 Hz
Lansmont Model 6200 Long-Stroke Vibration Test System
- Dynamic force
- 4,936 lbs（21.9 kN）
- Frequency range
- 1 – 300 Hz
Companion equipment
Crystal Instruments Spider-80M MIMO Vibration Test Controller
- Input channels
- 16 / 24 / 32 / 48 / 56
- DAC resolution
- 24 bit
Crystal Instruments Spider-81 / Spider-81B Vibration Test Controller
- DAC resolution
- 24 bit
- Input range
- ±20 V
Lansmont SAVER 3D15 Shock and Vibration Field Data Recorder
- Weight
- 473 g (16.7 oz)
- Dimensions
- 95 x 74 x 43 mm (3.7 x 2.9 x 1.7 in.)
Lansmont SAVER 3M30 Transport Environment Data Recorder
- Sample rate
- 100 / 200 / 500 / 1,000 / 2,500 samples/sec
- Acceleration range
- 100 g
Start from the standard, then choose the equipment
Send us the test object, the standard and your lab conditions. You get a configuration list within one business day.
